11 visitsThe following is a detailed method for ground-mounted basketball stands made in Hebei, China, including installation steps, required tools, and precautions:
Installation steps
Preparation:
Confirm the installation location: Choose a flat, solid ground away from obstacles such as wires and trees. For outdoor basketball stands, factors such as wind direction and sunshine should also be considered.
Prepare tools and materials: including electric drills, wrenches, screwdrivers, levels, measuring tools (such as tape measures), screws, expansion screws, embedded parts, etc.
Digging embedded pits:
According to the installation requirements of the basketball stand, dig an embedded pit of appropriate size, generally about 70cm×80cm.
Put the embedded parts into the embedded pit, adjust it to a horizontal state, and then use concrete or other suitable fillers to fix the embedded parts in the pit. Wait until the concrete is completely solidified before proceeding to the next step of installation.
Install the bracket and basketball stand:
Insert the bracket column of the basketball stand into the base, and fix the base and column together with screws.
Install the basketball stand on the bracket, adjust it to a suitable height, and fix it with screws.
Install the backboard and basket:
Place the backboard and basket on the column according to the installation instructions, and pay attention to adjusting the angle of the backboard and the height of the basket.
Use screws or other fasteners to fix the backboard and basket on the column to ensure that the connection is firm and reliable.
Calibration and inspection:
Use a level to calibrate the basketball stand to ensure that its verticality and horizontality meet the standards.
Perform a comprehensive inspection of the basketball stand to ensure that all parts are firmly installed and not loose. Check whether the backboard, basket and other parts are damaged or defective, and replace them in time if necessary.
Required tools
Electric drill: used to drill holes to facilitate the base of the basketball stand to be fixed on the ground.
Wrench and screwdriver: used to tighten and loosen nuts to ensure that each component is firmly connected.
Level: ensure that the basketball stand is level after installation.
Tape measure: used to measure the height and distance of the installation location.
Pencil or marker: used to mark the drilling location on the ground or wall.
Hammer: used to knock some difficult-to-install parts.
Concrete: If the basketball stand needs to be fixed on a concrete foundation, concrete and corresponding tools (such as mixers, shovels, etc.) need to be prepared.
Precautions
Safe construction: Be careful during installation to avoid injury. Minimize the entry of irrelevant personnel in the installation site.
Backboard installation:
Tempered glass backboard: The five connection points must be on the same plane and the force must be even; the arm, backboard, and hoop must be on the same plane, and the arm and hoop are strictly prohibited from contacting the glass backboard.
Composite fiberglass backboard: After installation, the connection points should be sealed with glass glue to prevent rainwater from seeping in and damaging the backboard.
Regular inspection:
Regularly inspect and maintain the basketball stand, such as tightening screws, cleaning surface dirt, etc.
Pay special attention to checking whether the connection between the backboard and the basket is loose or damaged.
For outdoor basketball stands, special attention should be paid to waterproofing and moisture-proofing, and regular inspection and cleaning of water or wet parts on the backboard and the basket.
Following the above steps and precautions, you can successfully install the ground basketball stand made in Hebei and ensure its stable and safe use.
Company Profile
Cangzhou Haoran Sports Equipment Co., Ltd. was established on January 4, 2016. It is located in Zhangxitai Village, Xiaoying Township, Yanshan County, Cangzhou City, Hebei Province. It is located at the midpoint of Jinan and Tianjin, and beside Xinxia Road at the junction of Shandong and Hebei. It is adjacent to the coast of Bohai Sea in the east and National Highway 205 in the west. It has a superior geographical location and convenient transportation. The company integrates scientific research, design, production, sales and service. Adhering to the principle of "excellent quality, low price and lifelong after-sales", it is committed to providing one-stop quality service.
Product Range
The company specializes in the production of various types of sports equipment, and its products cover:
Basketball stands: including electric hydraulic basketball stands, mobile one-arm basketball stands, fixed basketball stands (fixed height of 3.05m on the ground), organic/tempered/fiberglass backboards, etc.
Table tennis tables: indoor and outdoor table tennis tables, such as SMC table tennis tables, Golden Rainbow LED table tennis tables, etc.
Outdoor fitness equipment: treadmills, walking machines, flat machines, leg massagers, swings and other path equipment.
Indoor fitness equipment: dance bar, horizontal bar, parallel bar, pommel horse, dumbbell, kettlebell, barbell and other gymnastic weightlifting supplies.
Gymnastic sports equipment: high jump, judo, wrestling, gymnastics series special mats.
Other equipment: football goal, volleyball pole, badminton pole, field fence, campus sports equipment, education standard equipment, children's fun track and field equipment, happy gymnastics equipment, music and art equipment, sanitary equipment, teaching instruments, laboratory equipment, physical fitness testing equipment, children's toys, desks and stools, bunk beds, office furniture, plastic fields, artificial turf, etc.
